| Storageflex Fi240 Fibre & iSCSI Channel RAID |
|
Cable-less Design
Two 4Gbit Fibre Channel Interfaces per raid controller, Four FC Interface Maximum
Single or Dual Active RAID Controllers with up to 2GB Cache each, 4GB Cache Total
1024 LUNS/Hosts
Choice of Fibre Channel and SATA Disks
Hot Swap Controllers, Power, Fans and Disks
Online RAID (Dynamic LUN) Expansion
Predictive Drive Failure Analysis
Cluster Ready
Included RAID Management and Monitoring Software via Java or Web Browser |
|
|
| Storageflex Fi240 is Storageflex’s High Performance Fibre Channel RAID solution for mission critical Applications. Designed with redundancy throughout all components, Storageflex Fi240 provides maximum uptime for un-interrupted computing. Dual Hot Swappable Active-Active Mirrored Cache RAID Controllers connects to the SAN and provides Dual Data Path Connectivity for up to 240 Hot Swap Fibre Channel or Fibre Channel Attached SATA (FATA) Drives. Fault Tolerance Storage of up to 72TB with Fibre Channel Disks or 240 TB with Fibre Channel Attached SATA (FATA) Disks.
|
Ultimate in Scalability!
Start with as few as 15 Hot Swap Fibre Channel Drive Bays and expand with 15 drive bays at a time. Maximum capacity of 240 disks totaling 72TB with Fibre Channel Disks or 240 TB with Fibre Channel Attached SATA (FATA) Disks.
Convergence of Fibre Channel and iSCSI
Storageflex Fi240's Host Connection Configurations include Fibre Channel, iSCSI or both. Storageflex Fi240 is configurable for simultaneous access for Fibre Channel and iSCSI for the ultimate in investment protection.
Applications
With the most scalable architecture in capacity, types of disks and host connectivity, Fi240 is ideally suited for Mission Critical Online Storage with Hot Swap Fibre Channel and/or SATA Disks yet low cost enough for larger capacity disk based backup and archives.
Specification
|
Model : |
Fi240 |
|
RAID Controller : |
Single or Dual Active-Active RAID Controllers with Mirrored Cache Standard |
|
RAID Controller Memory : |
1GB – 2GB ECC (Error Correction Code). Total of 4GB Cache Maximum with Redundant RAID Controllers |
|
RAID Controller CPU : |
Daul High Performance Processors per RAID Controller |
|
RAID sets and Levels Supported : |
Up to 1,024 Simultaneous RAID Sets in varying levels including RAID levels 0, 1, 1+0, 3, 5, 50, 6 |
|
Standard Features : |
Online RAID (Dynamic LUN) Expansion, Automated Disk Rebuild to Multiple Hot Spare Disks,
Automated Disk Rebuild upon Insertion of replaced disk without user intervention, Alerts through SNMP traps, SMTP mail or to dial out to pager |
|
System and Remote Monitoring : |
Embedded Web Based Management Interface. Optional Java based software with GUI Interface
for time monitoring, configuration and reporting of RAID Controllers, Caches, Interfaces, Disks, RAID Sets, LUNs, Permissions to Logical Drives, Power Supplies and Fans’ failures and degraded components over in-band Fibre Channe |
|
Host Interface : |
FC: 2 x 4Gbit Fibre Channel Host Interface per raid controller, 4 x 4Gbit maximum
iSCSI: 4 x 1Gbit iSCSI Host Interface per raid controller, 8 x 1Gbit maximum |
|
Drive Capacity and Performance : |
146GB/300GB : 4.9ms Acceess Time, 2Gbit Fibre Channel Dual Loop, 10,000RPM Hot Swappable
73GB/146GB : 4.9ms Acceess Time, 2Gbit Fibre Channel Dual Loop, 15,000RPM Hot Swappable
250/400/500GB : 8.9ms Acceess Time, SATA 7,200RPM Hot Swappable |
|
Maximun number of Drives : |
16 X 15 FC/FATA Bay Chassis |
|
Maximum Capacity : |
72TB using Hot Swap Fibre Channel Disks
240TB using Hot Swap Fibre Channel Attached SATA Disks |
|
Power and Fans : |
2 Redundant Hot-Swappable power supplies
Redundant Hot Swap Fans per Chassis |
|
Warranty: |
3 years |
|
Download : |
Full Specification |
|